Description **PLEASE NOTE: THIS IS A VERY HEAVY ITEM. THEREFORE SHOP PICKUP ONLY* PRIOR ARRANGEMENTS NEED TO BE MADE SHOULD YOU WISH TO GET IT FREIGHTED* YOU CAN EMAIL US DEPENDING ON THE LOCATION SO WE CAN LET YOU KNOW THE COST OF FREIGHT.** Punch Dual P2 12″ Loaded Enclosure P2-2X12 The P2-2X12 is a dual P2 12” vented enclosure with 800 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals. The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We’re not talking junk in the trunk, we’re talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8″ MDF and tuned by our computer aided design software. P2 Loaded Enclosures feature similar tonal performance as P1 models, but with more power handling capacity. Proprietary high-flow, low-noise port Constructed with 5/8″ MDF High current binding posts Woofer Quantity 2 Woofer Size 12″ Woofer Series Punch P2 (P2D4-12) Nominal Impedance (ea) 1-Ohm Internally wired to create a 1-Ohm amplifier load Power Handling (Watts RMS) 800 Watts RMS 1600 Watts Max PLUS ROCKFORD R750-1D PRIME AMPLIFIER Prime 750 Watt Class-D Mono Amplifier R750-1D The PRIME R750-1D is an ultra-efficient mono amplifier that can produce 750 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R750-1D is optimized exclusively for use with subwoofers. This amplifier is optimized for subwoofers with the implementation of an infrasonic filter to keep those ultra-low (inaudible) bass notes from damaging your subwoofer system. Match with a 4-channel stereo amplifier for your mids/highs and you’ll have a Rockford Fosgate system that any Car Audio Fanatic will envy. 12dB/octave Butterworth crossover Infrasonic filter On-board Punch EQ with +18dB boost @ 45Hz Remote PLC (Punch Level Control) RCA pass-thru outputs Real time output and power supply thermal sensing Cast aluminium heatsink Top mounted controls 4 Gauge power/ground connectors MOSFET power supply Short circuit protection Muted turn on CEA-2006 Compliant CEA-2006 Guidelines CEA-2006 Power Rating 250W x 1 @ 4Ω ≤1.0% THD+N Number of Channels 4 Total Power (Sum of Rated Power) 750 Watts RMS Rated Power (RMS Continuous Power) 250 Watts x 1 @ 4-Ohm 500 Watts x 1 @ 2-Ohm 750 Watts x 1 @ 1-Ohm Dynamic Power (PVC/PowerCube®) 310 Watts x 1 @ 4-Ohms 0° Res 567 Watts x 1 @ 2-Ohms 0° Res 966 Watts x 1 @ 1-Ohm 0° Res Bridgeable No Frequency Response 20Hz to 250Hz +/-1dB Input Sensitivity 150 mV to 4 V Circuit Topology Class Class D Efficiency (average) 85% @ 4-Ohm 85% @ 2-Ohm 80% @ 1-Ohm Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0% 2-Ohm: <1.0% 1-Ohm: <1.0% Signal Input Low Level: 1 RCA Pair Signal Output Low Level: 1 RCA Pair Tone Controls 0dB to +18dB @ 45Hz Crossover Controls Low-Pass: Variable 50Hz – 500Hz @ 12dB/Octave Infrasonic: Remote Controls Punch Level Control (when connected, is linked to “gain control” to provide remote output level) Visual Indicators Power Protect Power Wire Gauge 4 AWG Power Input Connector Block Speaker Wire Gauge 12 AWG Speaker Output Connector Block Cooling Convection Heatsink Operating Voltage 9 – 16 VDC Recommended Fuse (not included) 100 A Average Current Draw (13.8V Music) 40 A Max. Current Draw (13.8V Sinewave) 80 A Suggested Alternator 75 A Dimensional Diagram Dimensions (H x W x D) (5cm x 17.20cm x 23.10cm)