Punch Dual P1 12″ Loaded Enclosure ***THIS PACK IS ONLY AVAILABLE UPON PICKUP IN-STORE. ***SHOULD YOU WISH DELIVERY, PLEASE ASK US FOR A QUOTE ON FREIGHT BEFORE PURCHASING P1-2X12 The P1-2X12 is a dual P1 12” vented enclosure with 500 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals. The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We’re not talking junk in the trunk, we’re talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8″ MDF and tuned by our computer aided design software. P1 Loaded Enclosures feature similar tonal performance as P2/P3 models, but are easier to move in-n-out of vehicles due to their lighter weight. •Constructed with 5/8″ MDF •Proprietary high-flow, low-noise port •High current binding posts Woofer Quantity 2 Woofer Series Punch P1 (P1S4-12) Nominal Impedance (ea) 2-Ohm Internally wired to create a 2-Ohm amplifier load Power Handling (Watts RMS) 500 Watts RMS 1000 Watts Max Enclosure Material 5/8″ MDF (Medium Density Fibreboard) Dimensions Box (H x W x D) Wedge (H x W x D1 x D2) 15.125″ x 33.875″ x 15.75″ (38.4cm x 86cm x 40cm) Woofer Size 12″ Enclosure Type Vented Speaker Connector Up to 10 AWG compression terminals R500X1D AMPLIFIER The Prime R500X1D is a 500 watt mono amplifier using efficient Class-D circuit topology. This amplifier is capable of running a 2-Ohm load and includes on-board Punch Bass and remote Punch Level Control. FEATURES: •12dB/octave Butterworth crossover •RCA pass-thru outputs •On-board Punch EQ with +18dB boost @ 45Hz •High level inputs •Remote PLC (Punch Level Control) •0°/180° Phase Switch •Real time output and power supply thermal sensing •Cast aluminium heat-sink •4 Gauge power/ground connectors •MOSFET power supply •Over current protection •Short circuit protection •Muted turn on CEA-2006 Power Rating 300W x 1 @ 4Ω ≤1.0% THD+N Number of Channels 1 Total Power (Sum of Rated Power) 500 Watts RMS Rated Power (RMS Continuous Power) 300 Watts x 1 @ 4-Ohms 500 Watts x 1 @ 2-Ohms Dynamic Power (PVC/Power-Cube®) 333 Watts x 1 @ 4-Ohms 0° Res 647 Watts x 1 @ 2-Ohms 0° Res Bridgeable No Frequency Response 20Hz to 250Hz +/-1dB Input Sensitivity 150 mV to 4 V Circuit Topology Class Class D Efficiency (average) 89% @ 4-Ohm Total Harmonic Distortion (THD + Noise) 4-Ohm: <1.0% 2-Ohm: <1.0% Signal Input High Level: 4-pin moulex Low Level: 1 RCA Pair Signal Output Low Level: 1 RCA Pair Tone Controls Punch Bass: 0dB to +12dB @ 45Hz Phase Control: Variable 0° to 180° Crossover Controls Low-Pass (LP): 50Hz to 250Hz @ 12dB/octave Butterworth Remote Controls Punch Level Control: When connected is linked to "gain control" to provide remote output level Visual Indicators Power Protect Power Wire Gauge 4 AWG Power Input Connector Screw Terminal Speaker Wire Gauge 8 AWG Speaker Output Connector Screw Terminal Cooling Convection Heat-sink Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 50 A Average Current Draw (13.8V Music) 25 A Max. Current Draw (13.8V Sine-wave) 50 A Dimensions (H x W x D) 1.98 x 6.77 x 8.5 (in) 5.02 x 17.19 x 21.59 (cm) 4 GAUGE WIRING KIT INCLUDED IN THE PACKAGE