Viper is the worlds best selling vehicle alarm and remote engine start brand. It’s parent company is Directed electronics who were founded in 1982 in the USA.
Directed Electronics other vehicle security brands include Python, Clifford and Hornet.
Viper is imported in New Zealand by Directed NZ who are based in Auckland. Being a small market all stock goes via Directed Australia so NZ is treated like another Aussie state (At least that’s how I view it!)
They introduced Viper back to NZ in the late part 2014 after it had been absent for about 8 years.
Sound Solutions & Auto Electrical is the only Authorized dealer and Installer for Viper Alarms in Auckland
Viper are well know for their remote engine start systems.
They offer a huge range of products and have some highly programmable systems with multi auxiliary outputs.
Personally I like to think of Viper security systems as the installers toy of choice there really a heap of options you can play with.
Frequently asked questions regarding remote start systems.
Below are some of the most common questions I get asked.
Feel welcome to comment or contact me if you have any questions that are not covered here and I’ll do my best to respond.
(Please remember that I’m in New Zealand so keep it relevant. If you have a technical issue and you’re not local take it up with your local installer ).
Can my vehicle be stolen/driven off whilst running under remote start?
No, it can not be driven off without turning the key in the ignition barrel first and pressing the brake pedal.
Without doing this the engine will stop if the brake pedal is pressed (handbrake dropped on manual transmission vehicles) or if the alarm is triggering (assuming you have it armed). The steering lock will also remain on.
What is a by-pass, or interface module?
Most modern vehicles come with a factory installed transponder immobiliser. This prevents the vehicle from being started without the chipped key.
If you have a plain metal key that starts the car then you don’t need one. If however your car has a transponder key then your remote start system will require an interface module (where available) for your specific vehicle which allows the car to start without the chipped key.
If no interface module is available then a by-pass module will be needed. This requires you to give up a key which will be placed inside the by-pass module.
How does a By-pass module work?
Basically a chipped key is placed inside the module which allows the car to read the chipped key when the remote start is activated. At all other times the vehicle requires a genuine chipped key to start the engine.
It is recommended to have at least 3 keys for the vehicle if using this method. Two for normal use and one for the bypass module. It is important that the by-pass module is well hidden so that the factory security is not easy to compromise. Technically only the chip part of the key is needed.
Is a remote start system safe to use with a manual transmission?
Yes and it’s safe. This post explains how it works…
Can a remote start work with diesel engines?
Yes, the remote start can be programmed to delay cranking after the ignition is turned on in order to allow the glow plugs to warm up.